Núcleo de Interoperabilidad de Datos (NID) - MINSAL
0.4.7 - draft Chile flag

This page is part of the Núcleo de Interoperabilidad de Datos (NID) - MINSAL (v0.4.7: STU1 Draft) based on FHIR (HL7® FHIR® Standard) R4. No current official version has been published yet. For a full list of available versions, see the Directory of published versions

Resource Profile: MINSALPaciente - Detailed Descriptions

Draft as of 2025-04-04

Definitions for the MINSALPaciente resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortInformation about an individual or animal receiving health care services
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mpi-pat-enlaceEstado: Si el elemento Patient.link está presente, entonces **DEBE** estar presente el Patient.active (link.exists() implies active.exists())
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:IdentidadDeGenero
Slice NameIdentidadDeGenero
Definition

Identidad De Género

ShortIdentidad De Género
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Identidad De Género) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Patient.extension:SexoBiologico
Slice NameSexoBiologico
Definition

Sexo Biologico del paciente

ShortSexo Biologico del paciente
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Sexo Biologico del paciente) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Patient.extension:nacionalidad
Slice Namenacionalidad
Definition

Esta extensión incluye códigos de países

ShortCódigo de Países
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Código de Países) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Patient.extension:PaisOrigen
Slice NamePaisOrigen
Definition

País de origen del paciente

ShortPaís de origen del paciente
Control0..1
TypeExtension(País de origen del paciente) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Patient.extension:Religion
Slice NameReligion
Definition

Religión

ShortReligión
Control0..1
TypeExtension(Religión) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Patient.extension:PueblosAfrodescendiente
Slice NamePueblosAfrodescendiente
Definition

Pueblos Afrodescendiente

ShortPueblos Afrodescendiente
Control0..1
TypeExtension(Pueblos Afrodescendiente) (Extension Type: boolean)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Patient.extension:PuebloOriginario
Slice NamePuebloOriginario
Definition

Extensión para describir si el paciente pertenece algún pueblo originario

ShortPueblos Originarios
Control0..1
TypeExtension(Pueblos Originarios) (Complex Extension)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Patient.identifier
Definition

Este es el listado de Identificaciones de un paciente. Se procura como R2 el RUN, pero en caso de no existir ese identificador se debe ocupar otro nacional u otro otorgado por país extranjero


An identifier for this patient.

ShortIdentificador de pacienteAn identifier for this patient
Comments

En caso de que el paciente posea una CI con número RUN válido, este debe ser ingresado como identificador, independiente de que tenga otros identificadores, los cuales también pueden ser ingresados. La identificación implica el ingreso del tipo de documento, el país de origen de ese documento y el valor del identificador

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Patient.identifier.use
Definition

De contar el Paciente con una Cédula de Identidad Nacional, se sugiere el uso de esta como identificador


The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Se definirá como official pues en una primera etapa solo se considerarán los identidicadores en esa categoría. Para una segunda etapa se abrirá este elemento para cualquier clase de identificador


Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Patient.identifier.type
Definition

Tipo de documento


A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortTipo de documentoDescription of identifier
Comments

Tipo de documento


This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control10..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Tipos de Identificadores de Pacientehttp://hl7.org/fhir/ValueSet/identifier-type
(required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSTiposIdentificadorPaciente)

Identificadores definidos por DEIS


A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.identifier.type.extension:paisEmisionDocumento
Slice NamepaisEmisionDocumento
Definition

Esta extensión incluye códigos de países

ShortCódigo de Países
Control0..1
TypeExtension(Código de Países) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Patient.identifier.type.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..1*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Patient.identifier.type.coding.system
Definition

Sistema mediante el cual se obtienen los códigos para un determinado tipo de documento


The identification of the code system that defines the meaning of the symbol in the code.

ShortSistema de identificación de tipos de documentosIdentity of the terminology system
Comments

En la URL del sistema se describe el set de códigos. Por ejemplo, si se desea usar Cédula de identidad el código es NNxxx en donde xxx corresponde al identificador del país según la norma iso3166-1-N. Dado lo anterior si fuera Chile, el tipo de documento sería NNCL. En el Caso de Usar un Pasaporte este no requiere identificar país de origen dado que este es un elemento adicional, por lo que independiente del país el código será PPT según el VS indicado


The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Patient.identifier.type.coding.code
Definition

Código de Tipo de Documento


A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortCódigo de Tipo de DocumentoSymbol in syntax defined by the system
Control10..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Patient.identifier.type.coding.display
Definition

Glosa del Código Documento


A representation of the meaning of the code in the system, following the rules of the system.

ShortGlosa del Código DocumentoRepresentation defined by the system
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Patient.identifier.value
Definition

Número o valor de identificación


The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortValor del identificadorThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

ShortSi el registro de este paciente está en uso activo.Whether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Patient.name
Definition

Nombre del Paciente considerando, según el caso: 1er Nombre, Nombres, 1er Apellido y 2o Apellido


A name associated with the individual.

ShortNombres y Apellidos del Paciente considerando, según el caso: 1er Nombre, Nombres, 1er Apellido y 2o ApellidoA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control10..*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
mpi-pat-nombre: En caso de utilizar el dato nombre el Patient.name.given or Patient.name.family debe existir (family.exists() or given.exists())
SlicingThis element introduces a set of slices on Patient.name. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ use
  • 42. Patient.name:NombreOficial
    Slice NameNombreOficial
    Definition

    Determinación del nombre registrado oficialmente del Paciente


    A name associated with the individual.

    ShortDeterminación del nombre registrado oficialmente del PacienteA name associated with the patient
    Comments

    A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

    Control0..1*
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Patient.name:NombreOficial.use
    Definition

    este slice corresponde al nombre registrado al momento de nacer, por lo que se fuerza el valor "official"


    Identifies the purpose for this name.

    Shortuso del nombre del pacienteusual | official | temp | nickname | anonymous | old | maiden
    Comments

    Para ser considerado como el slice determinado para el uso de nombre completo, el use DEBE ser de valor de código "official"


    Applications can assume that a name is current unless it explicitly says that it is temporary or old.

    Control10..1
    BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

    The use of a human name.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Allows the appropriate name for a particular context of use to be selected from among a set of names.

    Pattern Valueofficial
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Patient.name:NombreOficial.family
    Definition

    Se define el primer apellido registrado al momento de nacer o aquel que se ha inscrito legalmente en el Registro Civil


    The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

    Short1er ApellidoFamily name (often called 'Surname')
    Comments

    Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namessurname
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Patient.name:NombreOficial.family.extension:segundoApellido
    Slice NamesegundoApellido
    Definition

    Segundo Apellido

    ShortSegundo Apellido
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Segundo Apellido) (Extension Type: string)
    Is Modifierfalse
    Must Supporttrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    50. Patient.name:NombreOficial.given
    Definition

    Todos los nombres de los pacientes no necesariamente solo el Primer Nombre


    Given name.

    ShortPrimer nombre y nombres del PacienteGiven names (not always 'first'). Includes middle names
    Comments

    If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namesfirst name, middle name
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Patient.name:NombreSocial
    Slice NameNombreSocial
    Definition

    Nombre con el cual se identifica al paciente sin ser este oficial. Se especifica solo en el uso del nombre


    A name associated with the individual.

    Shortnombre recurrente que usa el pacienteA name associated with the patient
    Comments

    A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

    Control0..1*
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Patient.name:NombreSocial.use
    Definition

    Este uso especifico se enfoca a la definición de un nombre social. Es por esta razón que el uso se fuerza a usual


    Identifies the purpose for this name.

    Shortuso que se le da al nombreusual | official | temp | nickname | anonymous | old | maiden
    Comments

    Para ser considerado como el slice determinado para el uso de nombre social, el use DEBE ser de valor de código "usual"


    Applications can assume that a name is current unless it explicitly says that it is temporary or old.

    Control10..1
    BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

    The use of a human name.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Allows the appropriate name for a particular context of use to be selected from among a set of names.

    Pattern Valueusual
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Patient.name:NombreSocial.text
    Definition

    Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

    ShortText representation of the full name
    Comments

    Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    A renderable, unencoded form.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Patient.name:NombreSocial.family
    Definition

    The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

    ShortFamily name (often called 'Surname')
    Comments

    Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Alternate Namessurname
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Patient.name:NombreSocial.given
    Definition

    Nombre Social del Paciente


    Given name.

    ShortNombre SocialGiven names (not always 'first'). Includes middle names
    Comments

    If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

    Control10..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namesfirst name, middle name
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Patient.name:NombreSocial.prefix
    Definition

    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

    ShortParts that come before the name
    Control0..0*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Patient.name:NombreSocial.suffix
    Definition

    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

    ShortParts that come after the name
    Control0..0*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Patient.name:NombreSocial.period
    Definition

    Indicates the period of time when this name was valid for the named person.

    ShortTime period when name was/is in use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows names to be placed in historical context.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Patient.telecom
    Definition

    Detalles del contacto de un paciente comúnmente el o los más usados (Ej: Teléfono fijo, móvil, email, etc.)


    A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

    ShortDetalles de contacto del PacienteA contact detail for the individual
    Comments

    A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

    Control0..*
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    People have (primary) ways to contact them in some way such as phone, email.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Patient.telecom.system
    Definition

    Sistema de contacto


    Telecommunications form for contact point - what communications system is required to make use of the contact.

    Shortphone | emailphone | fax | email | pager | url | sms | other
    Control10..1
    This element is affected by the following invariants: cpt-2
    BindingThe codes SHALL be taken from Medios de Comunicación con el Pacientehttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
    (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSSistemasComunicacion)
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Patient.telecom.value
    Definition

    Valor del contacto como por ejemplo el número de teléfono fijo o de móvil o el email del Paciente


    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

    ShortValor de contactoThe actual contact point details
    Comments

    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to support legacy numbers that are not in a tightly controlled format.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Patient.telecom.use
    Definition

    Propósito para el contacto que se ha definido


    Identifies the purpose for the contact point.

    Shorthome | work | temp | old | mobilehome | work | temp | old | mobile - purpose of this contact point
    Comments

    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

    Control0..1
    BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/contact-point-use)
    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    76. Patient.telecom.rank
    Definition

    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

    ShortOrden de uso del método de contacto, siendo 1 = prioritarioSpecify preferred order of use (1 = highest)
    Comments

    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

    Control0..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Patient.telecom.period
    Definition

    Time period when the contact point was/is in use.

    ShortPeriodo de tiempo durante el cual es válido el contacto del pacienteTime period when the contact point was/is in use
    Control0..1
    TypePeriod
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Patient.gender
    Definition

    Sexo Registrado


    Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

    ShortSexo Registral del pacientemale | female | other | unknown
    Comments

    The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

    Control10..1
    BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

    The gender of a person used for administrative purposes.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Needed for identification of the individual, in combination with (at least) name and birth date.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    82. Patient.birthDate
    Definition

    Fecha de nacimiento del Paciente.


    The date of birth for the individual.

    ShortFecha de nacimiento del Paciente.The date of birth for the individual
    Comments

    At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

    Control10..1
    Typedate
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Age of the individual drives many clinical processes.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    LOINC Code21112-8
    84. Patient.deceased[x]
    Definition

    Puede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.


    Indicates if the individual is deceased or not.

    ShortPuede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.Indicates if the individual is deceased or not
    Comments

    If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

    Control10..1
    TypeChoice of: boolean, dateTime
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    86. Patient.address
    Definition

    An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


    An address for the individual.

    ShortTipo de dato para agregar la direcciónAn address for the individual
    Comments

    Variable dirección


    Patient may have multiple addresses with different uses or applicable periods.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeAddress(Dirección del Paciente)
    Is Modifierfalse
    Must Supporttrue
    Requirements

    May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    88. Patient.maritalStatus
    Definition

    This field contains a patient's most recent marital (civil) status.

    ShortEstado civil del pacienteMarital (civil) status of a patient
    Control0..1
    BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Estado Civilhttp://hl7.org/fhir/ValueSet/marital-status
    (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSEstadoCivil)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Most, if not all systems capture it.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    90. Patient.contact
    Definition

    Contacto, tutor legal o representante del Paciente


    A contact party (e.g. guardian, partner, friend) for the patient.

    ShortContacto, tutor legal o representante del PacienteA contact party (e.g. guardian, partner, friend) for the patient
    Comments

    Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Need to track people you can contact about the patient.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
    pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
    92. Patient.contact.extension:IdContacto
    Slice NameIdContacto
    Definition

    Extensión para declarar identificación del contacto y la procedencia de esta

    ShortIdentificación del Contacto
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Identificación del Contacto de un Paciente) (Complex Extension)
    Is Modifierfalse
    Must Supporttrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    94. Patient.contact.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    96. Patient.contact.relationship
    Definition

    The nature of the relationship between the patient and the contact person.

    ShortRelación legal o de parentesco entre el contacto y el pacienteThe kind of relationship
    Control0..*
    BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from PatientContactRelationshiphttp://hl7.org/fhir/ValueSet/patient-contactrelationship
    (required to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

    VS FHIR para relación del contacto con el Paciente


    The nature of the relationship between a patient and a contact person for that patient.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Used to determine which contact person is the most relevant to approach, depending on circumstances.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    98. Patient.contact.relationship.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    100. Patient.contact.name
    Definition

    Nombre del contacto asociado al paciente


    A name associated with the contact person.

    ShortNombre del ContactoA name associated with the contact person
    Control0..1
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    102. Patient.contact.name.use
    Definition

    Nombre registrado oficialmente en el Registro Civil


    Identifies the purpose for this name.

    Shortuso del nombre del pacienteusual | official | temp | nickname | anonymous | old | maiden
    Comments

    El use DEBE ser de valor de código "official"


    Applications can assume that a name is current unless it explicitly says that it is temporary or old.

    Control0..1
    BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

    The use of a human name.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Allows the appropriate name for a particular context of use to be selected from among a set of names.

    Pattern Valueofficial
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    104. Patient.contact.name.family
    Definition

    Se define el primer apellido registrado al momento de nacer o aquel que se ha inscrito legalmente en el Registro Civil


    The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

    Short1er ApellidoFamily name (often called 'Surname')
    Comments

    Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namessurname
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    106. Patient.contact.name.family.extension:segundoApellido
    Slice NamesegundoApellido
    Definition

    Segundo Apellido

    ShortSegundo Apellido
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Segundo Apellido) (Extension Type: string)
    Is Modifierfalse
    Must Supporttrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    108. Patient.contact.name.given
    Definition

    Todos los nombres no necesariamente solo el Primero


    Given name.

    ShortPrimer nombre y nombres del Contacto o Representante LegalGiven names (not always 'first'). Includes middle names
    Comments

    If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namesfirst name, middle name
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    110. Patient.communication
    Definition

    Lenguaje en el cual se puede comunicar con el paciente


    A language which may be used to communicate with the patient about his or her health.

    ShortLenguaje en el cual se puede comunicar con el pacienteA language which may be used to communicate with the patient about his or her health
    Comments

    If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    112. Patient.communication.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    114. Patient.communication.language
    Definition

    Código del lenguaje específico


    The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

    ShortLenguaje específicoThe language which can be used to communicate with the patient about his or her health
    Comments

    The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

    Control1..1
    BindingThe codes SHALL be taken from The codes SHOULD be taken from Codigos Lenguajehttp://hl7.org/fhir/ValueSet/languages
    (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigoslenguaje)

    Value Set de HL7, # de elementos es muy grande para poder visualizarlo


    A human language.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    116. Patient.generalPractitioner
    Definition

    Proveedor de Salud designado como principal


    Patient's nominated care provider.

    ShortProveedor de Salud designado como principalPatient's nominated primary care provider
    Comments

    This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

    Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

    Control0..*
    TypeReference(CL Organización, CL Prestador, CL RolClinico, Organization, Practitioner, PractitionerRole)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Alternate NamescareProvider
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. Patient.generalPractitioner.reference
    Definition

    URI de referencia a la Organización o a un Médico


    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortURI de referencia a la Organización o a un MédicoLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control0..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    120. Patient.generalPractitioner.display
    Definition

    Texto alternativo a la referencia


    Plain text narrative that identifies the resource in addition to the resource reference.

    ShortTexto alternativo a la referenciaText alternative for the resource
    Comments

    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    122. Patient.link
    Definition

    Link to another patient resource that concerns the same actual patient.

    ShortEnlace que tiene el recurso Minsal Paciente con otro que sea la misma personaLink to another patient resource that concerns the same actual person
    Comments

    There is no assumption that linked patient records have mutual links.

    Control0..*
    TypeBackboneElement
    Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
    Must Supporttrue
    Summarytrue
    Requirements

    There are multiple use cases:

    • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
    • Distribution of patient information across multiple servers.
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    124. Patient.link.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    126. Patient.link.other
    Definition

    The other patient resource that the link refers to.

    ShortRelación mediante identifier o referencia al recursoThe other patient or related person resource that the link refers to
    Comments

    Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

    Control1..1
    TypeReference(CL Paciente, MINSAL Paciente, MINSAL Acompañante, Patient, RelatedPerson)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    128. Patient.link.type
    Definition

    Tipo de enlace


    The type of link between this patient resource and another patient resource.

    Shortreplaced-by | replaces | refer | seealso
    Control1..1
    BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

    The type of link between this patient resource and another patient resource.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Patient
    Invariantsmpi-pat-enlaceEstado: Si el elemento Patient.link está presente, entonces **DEBE** estar presente el Patient.active (link.exists() implies active.exists())
    2. Patient.extension:nacionalidad
    Slice Namenacionalidad
    Control0..1
    4. Patient.extension:PaisOrigen
    Slice NamePaisOrigen
    Control0..1
    TypeExtension(País de origen del paciente) (Extension Type: CodeableConcept)
    Must Supporttrue
    6. Patient.extension:Religion
    Slice NameReligion
    Control0..1
    TypeExtension(Religión) (Extension Type: CodeableConcept)
    Must Supporttrue
    8. Patient.extension:PueblosAfrodescendiente
    Slice NamePueblosAfrodescendiente
    Control0..1
    TypeExtension(Pueblos Afrodescendiente) (Extension Type: boolean)
    Must Supporttrue
    10. Patient.extension:PuebloOriginario
    Slice NamePuebloOriginario
    Control0..1
    TypeExtension(Pueblos Originarios) (Complex Extension)
    Must Supporttrue
    12. Patient.identifier
    ShortIdentificador de paciente
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..?
    14. Patient.identifier.type
    Definition

    Tipo de documento

    ShortTipo de documento
    Comments

    Tipo de documento

    Control1..?
    BindingThe codes SHALL be taken from Tipos de Identificadores de Paciente
    (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSTiposIdentificadorPaciente)

    Identificadores definidos por DEIS

    16. Patient.identifier.type.coding
    Control1..1
    18. Patient.identifier.type.coding.code
    Control1..?
    20. Patient.identifier.value
    ShortValor del identificador
    Control1..?
    Must Supporttrue
    22. Patient.active
    ShortSi el registro de este paciente está en uso activo.
    Must Supporttrue
    24. Patient.name
    Control1..?
    Must Supporttrue
    Invariantsmpi-pat-nombre: En caso de utilizar el dato nombre el Patient.name.given or Patient.name.family debe existir (family.exists() or given.exists())
    26. Patient.telecom
    28. Patient.telecom.system
    Definition

    Sistema de contacto

    Shortphone | email
    Control1..?
    BindingThe codes SHALL be taken from Medios de Comunicación con el Paciente
    (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSSistemasComunicacion)
    30. Patient.telecom.value
    ShortValor de contacto
    Control1..?
    32. Patient.telecom.rank
    ShortOrden de uso del método de contacto, siendo 1 = prioritario
    Must Supporttrue
    34. Patient.telecom.period
    ShortPeriodo de tiempo durante el cual es válido el contacto del paciente
    Must Supporttrue
    36. Patient.gender
    ShortSexo Registral del paciente
    Control1..?
    38. Patient.birthDate
    Control1..?
    LOINC Code
    40. Patient.deceased[x]
    Definition

    Puede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.

    ShortPuede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.
    Control1..?
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    42. Patient.address
    TypeAddress(Dirección del Paciente)
    44. Patient.maritalStatus
    ShortEstado civil del paciente
    BindingThe codes SHALL be taken from Estado Civil
    (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSEstadoCivil)
    Must Supporttrue
    46. Patient.link
    ShortEnlace que tiene el recurso Minsal Paciente con otro que sea la misma persona
    Must Supporttrue
    48. Patient.link.other
    ShortRelación mediante identifier o referencia al recurso
    TypeReference(CL Paciente, MINSAL Paciente, MINSAL Acompañante)
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    50. Patient.link.type
    Definition

    Tipo de enlace

    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. Patient
    Definition

    Demographics and other administrative information about an individual or animal receiving care or other health-related services.

    ShortInformation about an individual or animal receiving health care services
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesSubjectOfCare Client Resident
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    mpi-pat-enlaceEstado: Si el elemento Patient.link está presente, entonces **DEBE** estar presente el Patient.active (link.exists() implies active.exists())
    2. Patient.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Patient.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Patient.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Patient.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Patient.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Patient.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Patient.extension
    Definition

    An Extension

    ShortExtension
    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. Patient.extension:IdentidadDeGenero
      Slice NameIdentidadDeGenero
      Definition

      Identidad De Género

      ShortIdentidad De Género
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Identidad De Género) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Patient.extension:SexoBiologico
      Slice NameSexoBiologico
      Definition

      Sexo Biologico del paciente

      ShortSexo Biologico del paciente
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Sexo Biologico del paciente) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. Patient.extension:nacionalidad
      Slice Namenacionalidad
      Definition

      Esta extensión incluye códigos de países

      ShortCódigo de Países
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Código de Países) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      22. Patient.extension:PaisOrigen
      Slice NamePaisOrigen
      Definition

      País de origen del paciente

      ShortPaís de origen del paciente
      Control0..1
      TypeExtension(País de origen del paciente) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Patient.extension:Religion
      Slice NameReligion
      Definition

      Religión

      ShortReligión
      Control0..1
      TypeExtension(Religión) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Patient.extension:PueblosAfrodescendiente
      Slice NamePueblosAfrodescendiente
      Definition

      Pueblos Afrodescendiente

      ShortPueblos Afrodescendiente
      Control0..1
      TypeExtension(Pueblos Afrodescendiente) (Extension Type: boolean)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Patient.extension:PuebloOriginario
      Slice NamePuebloOriginario
      Definition

      Extensión para describir si el paciente pertenece algún pueblo originario

      ShortPueblos Originarios
      Control0..1
      TypeExtension(Pueblos Originarios) (Complex Extension)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      30. Patient.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Patient.identifier
      Definition

      Este es el listado de Identificaciones de un paciente. Se procura como R2 el RUN, pero en caso de no existir ese identificador se debe ocupar otro nacional u otro otorgado por país extranjero

      ShortIdentificador de paciente
      Comments

      En caso de que el paciente posea una CI con número RUN válido, este debe ser ingresado como identificador, independiente de que tenga otros identificadores, los cuales también pueden ser ingresados. La identificación implica el ingreso del tipo de documento, el país de origen de ese documento y el valor del identificador

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Patient.identifier.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      36. Patient.identifier.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 38. Patient.identifier.use
        Definition

        De contar el Paciente con una Cédula de Identidad Nacional, se sugiere el uso de esta como identificador

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Se definirá como official pues en una primera etapa solo se considerarán los identidicadores en esa categoría. Para una segunda etapa se abrirá este elemento para cualquier clase de identificador

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUse
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Patient.identifier.type
        Definition

        Tipo de documento

        ShortTipo de documento
        Comments

        Tipo de documento

        Control1..1
        BindingThe codes SHALL be taken from Tipos de Identificadores de Paciente
        (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSTiposIdentificadorPaciente)

        Identificadores definidos por DEIS

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Patient.identifier.type.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        44. Patient.identifier.type.extension
        Definition

        Se usa esta extensión para agregarle al tipo de documento el país de origen de este

        ShortPaís de Origen del Documento de Id
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 46. Patient.identifier.type.extension:paisEmisionDocumento
          Slice NamepaisEmisionDocumento
          Definition

          Esta extensión incluye códigos de países

          ShortCódigo de Países
          Control0..1
          TypeExtension(Código de Países) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          48. Patient.identifier.type.coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control1..1
          TypeCoding
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Patient.identifier.type.coding.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          52. Patient.identifier.type.coding.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 54. Patient.identifier.type.coding.system
            Definition

            Sistema mediante el cual se obtienen los códigos para un determinado tipo de documento

            ShortSistema de identificación de tipos de documentos
            Comments

            En la URL del sistema se describe el set de códigos. Por ejemplo, si se desea usar Cédula de identidad el código es NNxxx en donde xxx corresponde al identificador del país según la norma iso3166-1-N. Dado lo anterior si fuera Chile, el tipo de documento sería NNCL. En el Caso de Usar un Pasaporte este no requiere identificar país de origen dado que este es un elemento adicional, por lo que independiente del país el código será PPT según el VS indicado

            Control0..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Patient.identifier.type.coding.version
            Definition

            The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

            ShortVersion of the system - if relevant
            Comments

            Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Patient.identifier.type.coding.code
            Definition

            Código de Tipo de Documento

            ShortCódigo de Tipo de Documento
            Control1..1
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to refer to a particular code in the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Patient.identifier.type.coding.display
            Definition

            Glosa del Código Documento

            ShortGlosa del Código Documento
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Patient.identifier.type.coding.userSelected
            Definition

            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

            ShortIf this coding was chosen directly by the user
            Comments

            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Patient.identifier.type.text
            Definition

            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            ShortPlain text representation of the concept
            Comments

            Very often the text is the same as a displayName of one of the codings.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Patient.identifier.system
            Definition

            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

            ShortThe namespace for the identifier value
            Comments

            Identifier.system is always case sensitive.

            Control0..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Patient.identifier.value
            Definition

            Número o valor de identificación

            ShortValor del identificador
            Comments

            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Example<br/><b>General</b>:123456
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Patient.identifier.period
            Definition

            Time period during which identifier is/was valid for use.

            ShortTime period when id is/was valid for use
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Patient.identifier.assigner
            Definition

            Organization that issued/manages the identifier.

            ShortOrganization that issued id (may be just text)
            Comments

            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. Patient.active
            Definition

            Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

            It is often used to filter patient lists to exclude inactive patients

            Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

            ShortSi el registro de este paciente está en uso activo.
            Comments

            If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

            Control0..1
            Typeboolean
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to mark a patient record as not to be used because it was created in error.

            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Patient.name
            Definition

            Nombre del Paciente considerando, según el caso: 1er Nombre, Nombres, 1er Apellido y 2o Apellido

            ShortNombres y Apellidos del Paciente considerando, según el caso: 1er Nombre, Nombres, 1er Apellido y 2o Apellido
            Comments

            A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

            Control1..*
            TypeHumanName
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            mpi-pat-nombre: En caso de utilizar el dato nombre el Patient.name.given or Patient.name.family debe existir (family.exists() or given.exists())
            SlicingThis element introduces a set of slices on Patient.name. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ use
            • 78. Patient.name:NombreOficial
              Slice NameNombreOficial
              Definition

              Determinación del nombre registrado oficialmente del Paciente

              ShortDeterminación del nombre registrado oficialmente del Paciente
              Comments

              A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

              Control0..1
              TypeHumanName
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Requirements

              Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Patient.name:NombreOficial.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              82. Patient.name:NombreOficial.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 84. Patient.name:NombreOficial.use
                Definition

                este slice corresponde al nombre registrado al momento de nacer, por lo que se fuerza el valor "official"

                Shortuso del nombre del paciente
                Comments

                Para ser considerado como el slice determinado para el uso de nombre completo, el use DEBE ser de valor de código "official"

                Control1..1
                BindingThe codes SHALL be taken from NameUse
                (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                The use of a human name.

                Typecode
                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Requirements

                Allows the appropriate name for a particular context of use to be selected from among a set of names.

                Pattern Valueofficial
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Patient.name:NombreOficial.text
                Definition

                Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                ShortText representation of the full name
                Comments

                Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                A renderable, unencoded form.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. Patient.name:NombreOficial.family
                Definition

                Se define el primer apellido registrado al momento de nacer o aquel que se ha inscrito legalmente en el Registro Civil

                Short1er Apellido
                Comments

                Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Alternate Namessurname
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. Patient.name:NombreOficial.family.id
                Definition

                unique id for the element within a resource (for internal references)

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                92. Patient.name:NombreOficial.family.extension
                Definition

                Extensión para la declaración de un segundo apellido

                ShortExtensión para el segundo apellido
                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Patient.name.family.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 94. Patient.name:NombreOficial.family.extension:segundoApellido
                  Slice NamesegundoApellido
                  Definition

                  Segundo Apellido

                  ShortSegundo Apellido
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(Segundo Apellido) (Extension Type: string)
                  Is Modifierfalse
                  Must Supporttrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  96. Patient.name:NombreOficial.family.value
                  Definition

                  The actual value

                  ShortPrimitive value for string
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  Max Length:1048576
                  98. Patient.name:NombreOficial.given
                  Definition

                  Todos los nombres de los pacientes no necesariamente solo el Primer Nombre

                  ShortPrimer nombre y nombres del Paciente
                  Comments

                  If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                  Control0..*
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Alternate Namesfirst name, middle name
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  100. Patient.name:NombreOficial.prefix
                  Definition

                  Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                  ShortParts that come before the name
                  Control0..*
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  102. Patient.name:NombreOficial.suffix
                  Definition

                  Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                  ShortParts that come after the name
                  Control0..*
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  104. Patient.name:NombreOficial.period
                  Definition

                  Indicates the period of time when this name was valid for the named person.

                  ShortTime period when name was/is in use
                  Control0..1
                  TypePeriod
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows names to be placed in historical context.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. Patient.name:NombreSocial
                  Slice NameNombreSocial
                  Definition

                  Nombre con el cual se identifica al paciente sin ser este oficial. Se especifica solo en el uso del nombre

                  Shortnombre recurrente que usa el paciente
                  Comments

                  A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                  Control0..1
                  TypeHumanName
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  108. Patient.name:NombreSocial.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  110. Patient.name:NombreSocial.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 112. Patient.name:NombreSocial.use
                    Definition

                    Este uso especifico se enfoca a la definición de un nombre social. Es por esta razón que el uso se fuerza a usual

                    Shortuso que se le da al nombre
                    Comments

                    Para ser considerado como el slice determinado para el uso de nombre social, el use DEBE ser de valor de código "usual"

                    Control1..1
                    BindingThe codes SHALL be taken from NameUse
                    (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                    The use of a human name.

                    Typecode
                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Allows the appropriate name for a particular context of use to be selected from among a set of names.

                    Pattern Valueusual
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    114. Patient.name:NombreSocial.text
                    Definition

                    Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                    ShortText representation of the full name
                    Comments

                    Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                    Control0..0
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    A renderable, unencoded form.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    116. Patient.name:NombreSocial.family
                    Definition

                    The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                    ShortFamily name (often called 'Surname')
                    Comments

                    Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                    Control0..0
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Alternate Namessurname
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    118. Patient.name:NombreSocial.given
                    Definition

                    Nombre Social del Paciente

                    ShortNombre Social
                    Comments

                    If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                    Control1..*
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Alternate Namesfirst name, middle name
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    120. Patient.name:NombreSocial.prefix
                    Definition

                    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                    ShortParts that come before the name
                    Control0..0
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    122. Patient.name:NombreSocial.suffix
                    Definition

                    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                    ShortParts that come after the name
                    Control0..0
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    124. Patient.name:NombreSocial.period
                    Definition

                    Indicates the period of time when this name was valid for the named person.

                    ShortTime period when name was/is in use
                    Control0..0
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows names to be placed in historical context.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    126. Patient.telecom
                    Definition

                    Detalles del contacto de un paciente comúnmente el o los más usados (Ej: Teléfono fijo, móvil, email, etc.)

                    ShortDetalles de contacto del Paciente
                    Comments

                    A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                    Control0..*
                    TypeContactPoint
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    People have (primary) ways to contact them in some way such as phone, email.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    128. Patient.telecom.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    130. Patient.telecom.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 132. Patient.telecom.system
                      Definition

                      Sistema de contacto

                      Shortphone | email
                      Control1..1
                      This element is affected by the following invariants: cpt-2
                      BindingThe codes SHALL be taken from Medios de Comunicación con el Paciente
                      (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSSistemasComunicacion)
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      134. Patient.telecom.value
                      Definition

                      Valor del contacto como por ejemplo el número de teléfono fijo o de móvil o el email del Paciente

                      ShortValor de contacto
                      Comments

                      Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Need to support legacy numbers that are not in a tightly controlled format.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      136. Patient.telecom.use
                      Definition

                      Propósito para el contacto que se ha definido

                      Shorthome | work | temp | old | mobile
                      Comments

                      Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                      Control0..1
                      BindingThe codes SHALL be taken from ContactPointUse
                      (required to http://hl7.org/fhir/ValueSet/contact-point-use)
                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      138. Patient.telecom.rank
                      Definition

                      Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                      ShortOrden de uso del método de contacto, siendo 1 = prioritario
                      Comments

                      Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                      Control0..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      140. Patient.telecom.period
                      Definition

                      Time period when the contact point was/is in use.

                      ShortPeriodo de tiempo durante el cual es válido el contacto del paciente
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      142. Patient.gender
                      Definition

                      Sexo Registrado

                      ShortSexo Registral del paciente
                      Comments

                      The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                      Control1..1
                      BindingThe codes SHALL be taken from AdministrativeGender
                      (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                      The gender of a person used for administrative purposes.

                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Needed for identification of the individual, in combination with (at least) name and birth date.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      144. Patient.birthDate
                      Definition

                      Fecha de nacimiento del Paciente.

                      ShortFecha de nacimiento del Paciente.
                      Comments

                      At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                      Control1..1
                      Typedate
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Age of the individual drives many clinical processes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      LOINC Code21112-8
                      146. Patient.deceased[x]
                      Definition

                      Puede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.

                      ShortPuede indicar si el paciente esta fallecido o no o en su defecto, agregar la fecha de fallecimiento.
                      Comments

                      If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                      Control1..1
                      TypeChoice of: boolean, dateTime
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Must Support TypesNo must-support rules about the choice of types/profiles
                      Summarytrue
                      Requirements

                      The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      148. Patient.address
                      Definition

                      An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                      ShortTipo de dato para agregar la dirección
                      Comments

                      Variable dirección

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeAddress(Dirección del Paciente)
                      Is Modifierfalse
                      Must Supporttrue
                      Requirements

                      May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      150. Patient.maritalStatus
                      Definition

                      This field contains a patient's most recent marital (civil) status.

                      ShortEstado civil del paciente
                      Control0..1
                      BindingThe codes SHALL be taken from Estado Civil
                      (required to https://interoperabilidad.minsal.cl/fhir/ig/nid/ValueSet/VSEstadoCivil)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Requirements

                      Most, if not all systems capture it.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      152. Patient.multipleBirth[x]
                      Definition

                      Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                      ShortWhether patient is part of a multiple birth
                      Comments

                      Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                      Control0..1
                      TypeChoice of: boolean, integer
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Requirements

                      For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      154. Patient.photo
                      Definition

                      Image of the patient.

                      ShortImage of the patient
                      Comments

                      Guidelines:

                      • Use id photos, not clinical photos.
                      • Limit dimensions to thumbnail.
                      • Keep byte count low to ease resource updates.
                      Control0..*
                      TypeAttachment
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      156. Patient.contact
                      Definition

                      Contacto, tutor legal o representante del Paciente

                      ShortContacto, tutor legal o representante del Paciente
                      Comments

                      Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Requirements

                      Need to track people you can contact about the patient.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                      158. Patient.contact.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      160. Patient.contact.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.contact.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 162. Patient.contact.extension:IdContacto
                        Slice NameIdContacto
                        Definition

                        Extensión para declarar identificación del contacto y la procedencia de esta

                        ShortIdentificación del Contacto
                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension(Identificación del Contacto de un Paciente) (Complex Extension)
                        Is Modifierfalse
                        Must Supporttrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        164. Patient.contact.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        166. Patient.contact.relationship
                        Definition

                        The nature of the relationship between the patient and the contact person.

                        ShortRelación legal o de parentesco entre el contacto y el paciente
                        Control0..*
                        BindingThe codes SHALL be taken from PatientContactRelationship
                        (required to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

                        VS FHIR para relación del contacto con el Paciente

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Used to determine which contact person is the most relevant to approach, depending on circumstances.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        168. Patient.contact.relationship.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        170. Patient.contact.relationship.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Patient.contact.relationship.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 172. Patient.contact.relationship.coding
                          Definition

                          A reference to a code defined by a terminology system.

                          ShortCode defined by a terminology system
                          Comments

                          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                          Control0..*
                          TypeCoding
                          Is Modifierfalse
                          Must Supporttrue
                          Summarytrue
                          Requirements

                          Allows for alternative encodings within a code system, and translations to other code systems.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          174. Patient.contact.relationship.text
                          Definition

                          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                          ShortPlain text representation of the concept
                          Comments

                          Very often the text is the same as a displayName of one of the codings.

                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          176. Patient.contact.name
                          Definition

                          Nombre del contacto asociado al paciente

                          ShortNombre del Contacto
                          Control0..1
                          TypeHumanName
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          178. Patient.contact.name.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          180. Patient.contact.name.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Patient.contact.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 182. Patient.contact.name.use
                            Definition

                            Nombre registrado oficialmente en el Registro Civil

                            Shortuso del nombre del paciente
                            Comments

                            El use DEBE ser de valor de código "official"

                            Control0..1
                            BindingThe codes SHALL be taken from NameUse
                            (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                            The use of a human name.

                            Typecode
                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            Allows the appropriate name for a particular context of use to be selected from among a set of names.

                            Pattern Valueofficial
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            184. Patient.contact.name.text
                            Definition

                            Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                            ShortText representation of the full name
                            Comments

                            Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            A renderable, unencoded form.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            186. Patient.contact.name.family
                            Definition

                            Se define el primer apellido registrado al momento de nacer o aquel que se ha inscrito legalmente en el Registro Civil

                            Short1er Apellido
                            Comments

                            Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Alternate Namessurname
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            188. Patient.contact.name.family.id
                            Definition

                            unique id for the element within a resource (for internal references)

                            Shortxml:id (or equivalent in JSON)
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            190. Patient.contact.name.family.extension
                            Definition

                            Extensión para la declaración de un segundo apellido

                            ShortExtensión para 2o apellido
                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Patient.contact.name.family.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 192. Patient.contact.name.family.extension:segundoApellido
                              Slice NamesegundoApellido
                              Definition

                              Segundo Apellido

                              ShortSegundo Apellido
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeExtension(Segundo Apellido) (Extension Type: string)
                              Is Modifierfalse
                              Must Supporttrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              194. Patient.contact.name.family.value
                              Definition

                              The actual value

                              ShortPrimitive value for string
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              Max Length:1048576
                              196. Patient.contact.name.given
                              Definition

                              Todos los nombres no necesariamente solo el Primero

                              ShortPrimer nombre y nombres del Contacto o Representante Legal
                              Comments

                              If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Alternate Namesfirst name, middle name
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              198. Patient.contact.name.prefix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                              ShortParts that come before the name
                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              200. Patient.contact.name.suffix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                              ShortParts that come after the name
                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              202. Patient.contact.name.period
                              Definition

                              Indicates the period of time when this name was valid for the named person.

                              ShortTime period when name was/is in use
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows names to be placed in historical context.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              204. Patient.contact.telecom
                              Definition

                              A contact detail for the person, e.g. a telephone number or an email address.

                              ShortA contact detail for the person
                              Comments

                              Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                              Control0..*
                              TypeContactPoint
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              People have (primary) ways to contact them in some way such as phone, email.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              206. Patient.contact.address
                              Definition

                              Address for the contact person.

                              ShortAddress for the contact person
                              Control0..1
                              TypeAddress
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              Need to keep track where the contact person can be contacted per postal mail or visited.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              208. Patient.contact.gender
                              Definition

                              Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                              Shortmale | female | other | unknown
                              Control0..1
                              BindingThe codes SHALL be taken from AdministrativeGender
                              (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                              The gender of a person used for administrative purposes.

                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Requirements

                              Needed to address the person correctly.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              210. Patient.contact.organization
                              Definition

                              Organization on behalf of which the contact is acting or for which the contact is working.

                              ShortOrganization that is associated with the contact
                              Control0..1
                              This element is affected by the following invariants: pat-1
                              TypeReference(Organization)
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              For guardians or business related contacts, the organization is relevant.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              212. Patient.contact.period
                              Definition

                              The period during which this contact person or organization is valid to be contacted relating to this patient.

                              ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              214. Patient.communication
                              Definition

                              Lenguaje en el cual se puede comunicar con el paciente

                              ShortLenguaje en el cual se puede comunicar con el paciente
                              Comments

                              If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                              Control0..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supporttrue
                              Summaryfalse
                              Requirements

                              If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              216. Patient.communication.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              218. Patient.communication.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              220. Patient.communication.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              222. Patient.communication.language
                              Definition

                              Código del lenguaje específico

                              ShortLenguaje específico
                              Comments

                              The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                              Control1..1
                              BindingThe codes SHALL be taken from Codigos Lenguaje
                              (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigoslenguaje)

                              Value Set de HL7, # de elementos es muy grande para poder visualizarlo

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supporttrue
                              Summaryfalse
                              Requirements

                              Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              224. Patient.communication.preferred
                              Definition

                              Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                              ShortLanguage preference indicator
                              Comments

                              This language is specifically identified for communicating healthcare information.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Requirements

                              People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              226. Patient.generalPractitioner
                              Definition

                              Proveedor de Salud designado como principal

                              ShortProveedor de Salud designado como principal
                              Comments

                              This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                              Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                              Control0..*
                              TypeReference(CL Organización, CL Prestador, CL RolClinico)
                              Is Modifierfalse
                              Must Supporttrue
                              Must Support TypesNo must-support rules about the choice of types/profiles
                              Summaryfalse
                              Alternate NamescareProvider
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              228. Patient.generalPractitioner.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              230. Patient.generalPractitioner.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Patient.generalPractitioner.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 232. Patient.generalPractitioner.reference
                                Definition

                                URI de referencia a la Organización o a un Médico

                                ShortURI de referencia a la Organización o a un Médico
                                Comments

                                Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                Control0..1
                                This element is affected by the following invariants: ref-1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                234. Patient.generalPractitioner.type
                                Definition

                                The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                ShortType the reference refers to (e.g. "Patient")
                                Comments

                                This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                                Aa resource (or, for logical models, the URI of the logical model).

                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                236. Patient.generalPractitioner.identifier
                                Definition

                                An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                ShortLogical reference, when literal reference is not known
                                Comments

                                When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                NoteThis is a business identifier, not a resource identifier (see discussion)
                                Control0..1
                                TypeIdentifier
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                238. Patient.generalPractitioner.display
                                Definition

                                Texto alternativo a la referencia

                                ShortTexto alternativo a la referencia
                                Comments

                                This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                240. Patient.managingOrganization
                                Definition

                                Organization that is the custodian of the patient record.

                                ShortOrganization that is the custodian of the patient record
                                Comments

                                There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                Control0..1
                                TypeReference(Organization)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Need to know who recognizes this patient record, manages and updates it.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                242. Patient.link
                                Definition

                                Link to another patient resource that concerns the same actual patient.

                                ShortEnlace que tiene el recurso Minsal Paciente con otro que sea la misma persona
                                Comments

                                There is no assumption that linked patient records have mutual links.

                                Control0..*
                                TypeBackboneElement
                                Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                Must Supporttrue
                                Summarytrue
                                Requirements

                                There are multiple use cases:

                                • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                • Distribution of patient information across multiple servers.
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                244. Patient.link.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                246. Patient.link.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                248. Patient.link.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                250. Patient.link.other
                                Definition

                                The other patient resource that the link refers to.

                                ShortRelación mediante identifier o referencia al recurso
                                Comments

                                Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                                Control1..1
                                TypeReference(CL Paciente, MINSAL Paciente, MINSAL Acompañante)
                                Is Modifierfalse
                                Must Supporttrue
                                Must Support TypesNo must-support rules about the choice of types/profiles
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                252. Patient.link.type
                                Definition

                                Tipo de enlace

                                Shortreplaced-by | replaces | refer | seealso
                                Control1..1
                                BindingThe codes SHALL be taken from LinkType
                                (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                                The type of link between this patient resource and another patient resource.

                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))