Tiempos de Espera Interoperable
0.1.6 - draft Chile flag

Tiempos de Espera Interoperable - Local Development build (v0.1.6) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: OrganizationLE - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the OrganizationLE resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Organization
2. Organization.identifier
Definition

Código DEIS del establecimiento de destino

ShortCódigo DEIS del establecimiento de destino
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
4. Organization.identifier.system
Definition

CS de los codigos DEIS

ShortCS de los codigos DEIS
BindingFor example codes, see Establecimiento Destino Codigo
(example to https://interoperabilidad.minsal.cl/fhir/ig/tei/ValueSet/VSEstablecimientoDestinoCodigo)
6. Organization.identifier.value
Definition

Código DEIS del establecimiento según Códigos del establecimientos

ShortCódigo DEIS del establecimiento
Control1..?

Guidance on how to interpret the contents of this table can be found here

0. Organization
Definition

A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

ShortA grouping of people or organizations with a common purpose
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
2. Organization.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Organization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Organization.identifier
Definition

Código DEIS del establecimiento de destino


Identifier for the organization that is used to identify the organization across multiple disparate systems.

ShortCódigo DEIS del establecimiento de destinoIdentifies this organization across multiple systems
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
This element is affected by the following invariants: org-1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Organization.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Organization.identifier.system
Definition

CS de los codigos DEIS


Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortCS de los codigos DEISThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control0..1
BindingFor example codes, see For codes, see Establecimiento Destino Codigo
(example to https://interoperabilidad.minsal.cl/fhir/ig/tei/ValueSet/VSEstablecimientoDestinoCodigo)
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Organization.identifier.value
Definition

Código DEIS del establecimiento según Códigos del establecimientos


The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortCódigo DEIS del establecimientoThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Organization.active
Definition

Indicador si una organización sigue vigente en su rol dentro del sistema de salud


Whether the organization's record is still in active use.

ShortEstado de si es una Organización Validada o no (true|false)Whether the organization's record is still in active use
Comments

This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used.

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Organization.name
Definition

Nombre Legal de la Organización


A name associated with the organization.

ShortNombre Legal de la OrganizacionName used for the organization
Comments

If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches.

Control0..1
This element is affected by the following invariants: org-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to use the name as the label of the organization.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Organization.alias
Definition

Nombre por lo que popularmente es conocida la Organización y que no corresponde al nombre legal


A list of alternate names that the organization is known as, or was known as in the past.

ShortNombre de FantasíaA list of alternate names that the organization is known as, or was known as in the past
Comments

There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization.

Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Over time locations and organizations go through many changes and can be known by different names.

For searching knowing previous names that the organization was known by can be very useful.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Organization.telecom
Definition

Contactos de la organización


A contact detail for the organization.

ShortContactos de la organizaciónA contact detail for the organization
Comments

The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself.

Control0..*
This element is affected by the following invariants: org-3
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Human contact for the organization.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
org-3: The telecom of an organization can never be of use 'home' (where(use = 'home').empty())
org-3: The telecom of an organization can never be of use 'home' (where(use = 'home').empty())
22. Organization.telecom.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/contact-point-use)
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Organization.address
Definition

Se definirá la dirección en una línea y se podría codificar en city la comuna, en district la provincia y en state la región


An address for the organization.

ShortDirección de la LocaliaciónAn address for the organization
Comments

Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used.

Control0..*
This element is affected by the following invariants: org-2
TypeAddress
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

May need to keep track of the organization's addresses for contacting, billing or reporting requirements.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
org-2: An address of an organization can never be of use 'home' (where(use = 'home').empty())
org-2: An address of an organization can never be of use 'home' (where(use = 'home').empty())
26. Organization.address.use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

The use of an address.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Organization.address.line
Definition

Aquí se escribe toda la dirección completa


This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

ShortCalle o avenida, numero y casa o deptoStreet name, number, direction & P.O. Box etc.
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Organization.address.city
Definition

Campo para Comuna de residencia. Se usa el valueSet de códigos de comunas definidos a nivel naciona.


The name of the city, town, suburb, village or other community or delivery center.

ShortCampo para Comuna de residenciaName of city, town etc.
Control0..1
BindingThe codes SHALL be taken from For codes, see Códigos de Comunas en Chile
(required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosComunaCL)

Códigos Comuna, Ministerio del Interior, 2018

Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Organization.address.district
Definition

Campo para Provincia de Residencia. Se usa el valueSet de códigos de provicias definidos a nivel naciona.


The name of the administrative area (county).

ShortCampo para Provincia de ResidenciaDistrict name (aka county)
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Control0..1
BindingThe codes SHALL be taken from For codes, see Códigos de Provincias en Chile
(required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosProvinciasCL)

Códigos Provincia, Ministerio del Interior, 2018

Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesCounty
Example<br/><b>General</b>:Madison
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Organization.address.state
Definition

Campo Región. Se usa el valueSet de códigos de regiones definidos a nivel naciona.


Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortCampo para la RegiónSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHALL be taken from For codes, see Códigos de Regiones en Chile
(required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosRegionesCL)

Códigos Regiones, Ministerio del Interior, 2018

Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Organization.address.country
Definition

Campo para País de Residencia


Country - a nation as commonly understood or generally accepted.

ShortCampo para País de ResidenciaCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
BindingThe codes SHALL be taken from For codes, see Códigos de Países
(required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/CodPais)
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Organization.contact
Definition

Contacto de la Organización para ciertos propósitos


Contact for the organization for a certain purpose.

ShortContacto de la Organización para ciertos propósitosContact for the organization for a certain purpose
Comments

Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Need to keep track of assigned contact points within bigger organization.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Organization.contact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Organization.contact.purpose
Definition

El propósito mediante el cual el contacto puede ser alcanzado


Indicates a purpose for which the contact can be reached.

ShortEl tipo de contactoThe type of contact
Control0..1
BindingUnless not suitable, these codes SHALL be taken from ContactEntityTypehttp://hl7.org/fhir/ValueSet/contactentity-type
(extensible to http://hl7.org/fhir/ValueSet/contactentity-type)

Códigos del propósito del contacto, HL7 FHIR


The purpose for which you would contact a contact party.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Need to distinguish between multiple contact persons.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Organization.contact.name
Definition

Nombre asociado al contacto


A name associated with the contact.

ShortNombre asociado al contactoA name associated with the contact
Control0..1
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Need to be able to track the person by name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Organization.contact.telecom
Definition

Detalles del contacto de la Organización comunmente el o los mas usados (Ej: Teléfono fijo, móvil, email, etc.)


A contact detail (e.g. a telephone number or an email address) by which the party may be contacted.

ShortDetalles de contacto de la OrganizaciónContact details (telephone, email, etc.) for a contact
Control0..*
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Organization.contact.telecom.use
Definition

Propósito para el contacto que se ha definido


Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobilehome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/contact-point-use)
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Organization
Definition

A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

ShortA grouping of people or organizations with a common purpose
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
2. Organization.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Organization.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Organization.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Organization.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Organization.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Organization.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Organization.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Organization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Organization.identifier
Definition

Código DEIS del establecimiento de destino

ShortCódigo DEIS del establecimiento de destino
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
This element is affected by the following invariants: org-1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Organization.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
22. Organization.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 24. Organization.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUse
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Organization.identifier.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Organization.identifier.system
    Definition

    CS de los codigos DEIS

    ShortCS de los codigos DEIS
    Comments

    Identifier.system is always case sensitive.

    Control0..1
    BindingFor example codes, see Establecimiento Destino Codigo
    (example to https://interoperabilidad.minsal.cl/fhir/ig/tei/ValueSet/VSEstablecimientoDestinoCodigo)
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Organization.identifier.value
    Definition

    Código DEIS del establecimiento según Códigos del establecimientos

    ShortCódigo DEIS del establecimiento
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Organization.identifier.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Organization.identifier.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control0..1
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Organization.active
    Definition

    Indicador si una organización sigue vigente en su rol dentro del sistema de salud

    ShortEstado de si es una Organización Validada o no (true|false)
    Comments

    This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used.

    This element is labeled as a modifier because it may be used to mark that the resource was created in error.

    Control0..1
    Typeboolean
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI.

    Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Organization.type
    Definition

    The kind(s) of organization that this is.

    ShortKind of organization
    Comments

    Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

    When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

    We expect that some jurisdictions will profile this optionality to be a single cardinality.

    Control0..*
    BindingFor example codes, see OrganizationType
    (example to http://hl7.org/fhir/ValueSet/organization-type)

    Used to categorize the organization.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Need to be able to track the kind of organization that this is - different organization types have different uses.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Organization.name
    Definition

    Nombre Legal de la Organización

    ShortNombre Legal de la Organizacion
    Comments

    If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches.

    Control0..1
    This element is affected by the following invariants: org-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to use the name as the label of the organization.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Organization.alias
    Definition

    Nombre por lo que popularmente es conocida la Organización y que no corresponde al nombre legal

    ShortNombre de Fantasía
    Comments

    There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization.

    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Over time locations and organizations go through many changes and can be known by different names.

    For searching knowing previous names that the organization was known by can be very useful.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Organization.telecom
    Definition

    Contactos de la organización

    ShortContactos de la organización
    Comments

    The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself.

    Control0..*
    This element is affected by the following invariants: org-3
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Human contact for the organization.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    org-3: The telecom of an organization can never be of use 'home' (where(use = 'home').empty())
    46. Organization.telecom.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    48. Organization.telecom.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Organization.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 50. Organization.telecom.system
      Definition

      Forma de telecomunicación para el punto de contacto: qué sistema de comunicación se requiere para hacer uso del contacto.

      Shortphone | fax | email | pager | url | sms | other
      Control0..1
      This element is affected by the following invariants: cpt-2
      BindingThe codes SHALL be taken from ContactPointSystem
      (required to http://hl7.org/fhir/ValueSet/contact-point-system)

      VS HL7 FHIR tipos diferentes de medios de contacto

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Organization.telecom.value
      Definition

      Valor del contacto como por ejemplo el numero de telefono fijo o de móvil o el email de Organiación

      ShortDato del contato de la ubicación descrita
      Comments

      Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to support legacy numbers that are not in a tightly controlled format.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. Organization.telecom.use
      Definition

      Identifies the purpose for the contact point.

      Shorthome | work | temp | old | mobile - purpose of this contact point
      Comments

      Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from ContactPointUse
      (required to http://hl7.org/fhir/ValueSet/contact-point-use)
      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Organization.telecom.rank
      Definition

      Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

      ShortSpecify preferred order of use (1 = highest)
      Comments

      Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

      Control0..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. Organization.telecom.period
      Definition

      Time period when the contact point was/is in use.

      ShortTime period when the contact point was/is in use
      Control0..1
      TypePeriod
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Organization.address
      Definition

      Se definirá la dirección en una línea y se podría codificar en city la comuna, en district la provincia y en state la región

      ShortDirección de la Localiación
      Comments

      Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used.

      Control0..*
      This element is affected by the following invariants: org-2
      TypeAddress
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      May need to keep track of the organization's addresses for contacting, billing or reporting requirements.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      org-2: An address of an organization can never be of use 'home' (where(use = 'home').empty())
      62. Organization.address.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      64. Organization.address.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Organization.address.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 66. Organization.address.use
        Definition

        The purpose of this address.

        Shorthome | work | temp | old | billing - purpose of this address
        Comments

        Applications can assume that an address is current unless it explicitly says that it is temporary or old.

        Control0..1
        BindingThe codes SHALL be taken from AddressUse
        (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

        The use of an address.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Allows an appropriate address to be chosen from a list of many.

        Example<br/><b>General</b>:home
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Organization.address.type
        Definition

        Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

        Shortpostal | physical | both
        Comments

        The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

        Control0..1
        BindingThe codes SHALL be taken from AddressType
        (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1)

        The type of an address (physical / postal).

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:both
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. Organization.address.text
        Definition

        Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

        ShortText representation of the address
        Comments

        Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        A renderable, unencoded form.

        Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. Organization.address.line
        Definition

        Aquí se escribe toda la dirección completa

        ShortCalle o avenida, numero y casa o depto
        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Example<br/><b>General</b>:137 Nowhere Street
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Organization.address.city
        Definition

        Campo para Comuna de residencia. Se usa el valueSet de códigos de comunas definidos a nivel naciona.

        ShortCampo para Comuna de residencia
        Control0..1
        BindingThe codes SHALL be taken from Códigos de Comunas en Chile
        (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosComunaCL)

        Códigos Comuna, Ministerio del Interior, 2018

        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Alternate NamesMunicpality
        Example<br/><b>General</b>:Erewhon
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. Organization.address.district
        Definition

        Campo para Provincia de Residencia. Se usa el valueSet de códigos de provicias definidos a nivel naciona.

        ShortCampo para Provincia de Residencia
        Comments

        District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

        Control0..1
        BindingThe codes SHALL be taken from Códigos de Provincias en Chile
        (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosProvinciasCL)

        Códigos Provincia, Ministerio del Interior, 2018

        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Alternate NamesCounty
        Example<br/><b>General</b>:Madison
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. Organization.address.state
        Definition

        Campo Región. Se usa el valueSet de códigos de regiones definidos a nivel naciona.

        ShortCampo para la Región
        Control0..1
        BindingThe codes SHALL be taken from Códigos de Regiones en Chile
        (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/VSCodigosRegionesCL)

        Códigos Regiones, Ministerio del Interior, 2018

        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Alternate NamesProvince, Territory
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        80. Organization.address.postalCode
        Definition

        A postal code designating a region defined by the postal service.

        ShortPostal code for area
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Alternate NamesZip
        Example<br/><b>General</b>:9132
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        82. Organization.address.country
        Definition

        Campo para País de Residencia

        ShortCampo para País de Residencia
        Comments

        ISO 3166 3 letter codes can be used in place of a human readable country name.

        Control0..1
        BindingThe codes SHALL be taken from Códigos de Países
        (required to https://hl7chile.cl/fhir/ig/clcore/ValueSet/CodPais)
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        84. Organization.address.period
        Definition

        Time period when address was/is in use.

        ShortTime period when address was/is in use
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows addresses to be placed in historical context.

        Example<br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        86. Organization.partOf
        Definition

        The organization of which this organization forms a part.

        ShortThe organization of which this organization forms a part
        Control0..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Requirements

        Need to be able to track the hierarchy of organizations within an organization.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. Organization.contact
        Definition

        Contacto de la Organización para ciertos propósitos

        ShortContacto de la Organización para ciertos propósitos
        Comments

        Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Need to keep track of assigned contact points within bigger organization.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. Organization.contact.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        92. Organization.contact.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        94. Organization.contact.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        96. Organization.contact.purpose
        Definition

        El propósito mediante el cual el contacto puede ser alcanzado

        ShortEl tipo de contacto
        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from ContactEntityType
        (extensible to http://hl7.org/fhir/ValueSet/contactentity-type)

        Códigos del propósito del contacto, HL7 FHIR

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Need to distinguish between multiple contact persons.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        98. Organization.contact.name
        Definition

        Nombre asociado al contacto

        ShortNombre asociado al contacto
        Control0..1
        TypeHumanName
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Need to be able to track the person by name.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. Organization.contact.telecom
        Definition

        Detalles del contacto de la Organización comunmente el o los mas usados (Ej: Teléfono fijo, móvil, email, etc.)

        ShortDetalles de contacto de la Organización
        Control0..*
        TypeContactPoint
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        People have (primary) ways to contact them in some way such as phone, email.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        102. Organization.contact.telecom.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        104. Organization.contact.telecom.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Organization.contact.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 106. Organization.contact.telecom.system
          Definition

          Forma de telecomunicación para el punto de contacto: qué sistema de comunicación se requiere para hacer uso del contacto.

          Shortphone | fax | email | pager | url | sms | other
          Control0..1
          This element is affected by the following invariants: cpt-2
          BindingThe codes SHALL be taken from ContactPointSystem
          (required to http://hl7.org/fhir/ValueSet/contact-point-system)
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. Organization.contact.telecom.value
          Definition

          Valor del contacto como por ejemplo el numero de telefono fijo o de móvil o el email del Paciente

          ShortDato del contato del paciente descrito
          Comments

          Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to support legacy numbers that are not in a tightly controlled format.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. Organization.contact.telecom.use
          Definition

          Propósito para el contacto que se ha definido

          Shorthome | work | temp | old | mobile
          Comments

          Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

          Control0..1
          BindingThe codes SHALL be taken from ContactPointUse
          (required to http://hl7.org/fhir/ValueSet/contact-point-use)
          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          112. Organization.contact.telecom.rank
          Definition

          Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

          ShortSpecify preferred order of use (1 = highest)
          Comments

          Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          114. Organization.contact.telecom.period
          Definition

          Time period when the contact point was/is in use.

          ShortTime period when the contact point was/is in use
          Control0..1
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          116. Organization.contact.address
          Definition

          Visiting or postal addresses for the contact.

          ShortVisiting or postal addresses for the contact
          Control0..1
          TypeAddress
          Is Modifierfalse
          Summaryfalse
          Requirements

          May need to keep track of a contact party's address for contacting, billing or reporting requirements.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          118. Organization.endpoint
          Definition

          Technical endpoints providing access to services operated for the organization.

          ShortTechnical endpoints providing access to services operated for the organization
          Control0..*
          TypeReference(Endpoint)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))